How to Refuel the Automobile Gearbox?

1. It is troublesome to replace the oil in the automobile gearbox since the gear oil can not be directly poured into the gearbox, it must use the oil presser.

Loose the screws on the gearbox fueling port, unscrew the gearbox drain screws, clear up the remained gearbox oil, then tighten the gearbox drain screws, pour the oil into the oil presser, put the presser hose into the port, then press the oil presser to make the oil flowing into the gearbox until under the mouth position (overflow that will increase the gearbox load is not allowed).

2. Tractor gearbox can be unscrewed and refueled

It should be noted that the gear oil must be replaced by the automatic transmission oil the manufacturer required, this is because the different automatic transmission of its internal structure, shift system parts and sealing parts and so will be different, the original oil is specially formulated depending on gearboxes’ structures and materials, other brands of oil even if the quality is good but may not apply.

• Prev archive
• Next archive